Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • ulisse/labmanager-systemd
1 result
Show changes
Commits on Source (5)
Hide whitespace changes
Inline Side-by-side
bin-ubuntu/get-config
View file @ b37747a9
#!/bin/bash
API_BASE_URL=https://labmanager-api.edu-al.unipmn.it/api/1.0
# curl uses an increasing delay. 5 retries are tried in about 30 seconds,
# so it's too quick for us. I increased it to 7, which is about 2 minutes.
# Note: the same variable was also used in the `retry` function.
MAX_RETRY=7
MAX_RETRY=5
RETRY_DELAY=5
NORMAL_CONFIG_NAME=normale
DEBUG=0
......@@ -52,7 +49,7 @@ debug() {
# authenticate and get the token
getTokenJSON() {
# store the whole response with the status at the end
HTTP_RESPONSE=$(curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "HTTPSTATUS:%{http_code}" --max-time 10 -X POST -H "Content-Type: application/json" -d "{\"login\":\"guest\",\"pwd\":\"\"}" ${API_BASE_URL}/login)
HTTP_RESPONSE=$(curl -s -k -w "HTTPSTATUS:%{http_code}" --max-time 10 -X POST -H "Content-Type: application/json" -d "{\"login\":\"guest\",\"pwd\":\"\"}" ${API_BASE_URL}/login)
ret=$?
if [[ $ret != 0 ]]; then
......@@ -95,14 +92,14 @@ stop() {
# get configuration from WS
getConfigVars() {
echo "Authenticating to WS..."
TOKEN_JSON=`getTokenJSON`
TOKEN_JSON=`retry getTokenJSON`
if [[ "$TOKEN_JSON" == "" ]]; then
return 2
fi
TOKEN=`echo ${TOKEN_JSON} | jsonValue token 1`
MACHINE_NAME=`hostname`
echo "Getting machine configuration..."
MACHINE_JSON=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k --max-time 10 -H "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/name/${MACHINE_NAME}`
MACHINE_JSON=`retry /usr/bin/curl -s -k --max-time 10 -H "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/name/${MACHINE_NAME}`
MACHINE_ID=`echo $MACHINE_JSON | jsonValue id 1`
MACHINE_CONFIGS_ID=`echo $MACHINE_JSON | jsonValue configs_id 1`
CONFIG_NAME=`echo $MACHINE_JSON | jsonValue name 2`
......@@ -135,7 +132,7 @@ getConfigFile() {
echo "Error downloading config file (machine_id empty, maybe it is not in LabManager's DB)"
return 1
fi
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /local/esame-machine.conf --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/configfile`
HTTP_STATUS=`retry /usr/bin/curl -s -k -w "%{http_code}" -o /local/esame-machine.conf --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/configfile`
if [[ $HTTP_STATUS -ne 200 ]]
then
echo "Error downloading config file (http_status=$HTTP_STATUS)"
......@@ -149,7 +146,7 @@ getConfigFile() {
getIpConfigFile() {
echo "Downloading machine iptables config file..."
# get ipconfig file
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /local/iptables --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/ipconfigfile`
HTTP_STATUS=`retry /usr/bin/curl -s -k -w "%{http_code}" -o /local/iptables --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/ipconfigfile`
if [[ $HTTP_STATUS -ne 200 ]]
then
echo "Error downloading iptables config file (http_status=$HTTP_STATUS)"
......@@ -162,7 +159,7 @@ getIpConfigFile() {
updateCurrentConfigId() {
# Update this machine's current config id
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /dev/null --max-time 10 -H "Content-Type: application/json" -H "Authorization: Bearer ${TOKEN}" \
HTTP_STATUS=`/usr/bin/curl -s -k -w "%{http_code}" -o /dev/null --max-time 10 -H "Content-Type: application/json" -H "Authorization: Bearer ${TOKEN}" \
-X PUT -d "{\"current_configs_id\":\"$MACHINE_CONFIGS_ID\"}" ${API_BASE_URL}/machines/${MACHINE_ID}/currentconfig`
if [[ $HTTP_STATUS -ne 200 ]]
......
bin/get-config
View file @ b37747a9
#!/bin/bash
API_BASE_URL=https://labmanager-api.edu-al.unipmn.it/api/1.0
# curl uses an increasing delay. 5 retries are tried in about 30 seconds,
# so it's too quick for us. I increased it to 7, which is about 2 minutes.
# Note: the same variable was also used in the `retry` function.
MAX_RETRY=7
MAX_RETRY=5
RETRY_DELAY=5
NORMAL_CONFIG_NAME=normale
DEBUG=0
......@@ -52,7 +49,7 @@ function debug() {
# authenticate and get the token
function getTokenJSON() {
# store the whole response with the status at the end
HTTP_RESPONSE=$(curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "HTTPSTATUS:%{http_code}" --max-time 10 -X POST -H "Content-Type: application/json" -d "{\"login\":\"guest\",\"pwd\":\"\"}" ${API_BASE_URL}/login)
HTTP_RESPONSE=$(curl -s -k -w "HTTPSTATUS:%{http_code}" --max-time 10 -X POST -H "Content-Type: application/json" -d "{\"login\":\"guest\",\"pwd\":\"\"}" ${API_BASE_URL}/login)
ret=$?
if [[ $ret != 0 ]]; then
......@@ -95,14 +92,14 @@ stop() {
# get configuration from WS
getConfigVars() {
echo "Authenticating to WS..."
TOKEN_JSON=`getTokenJSON`
TOKEN_JSON=`retry getTokenJSON`
if [[ "$TOKEN_JSON" == "" ]]; then
return 2
fi
TOKEN=`echo ${TOKEN_JSON} | jsonValue token 1`
MACHINE_NAME=`hostname`
echo "Getting machine configuration..."
MACHINE_JSON=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k --max-time 10 -H "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/name/${MACHINE_NAME}`
MACHINE_JSON=`retry /usr/bin/curl -s -k --max-time 10 -H "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/name/${MACHINE_NAME}`
MACHINE_ID=`echo $MACHINE_JSON | jsonValue id 1`
MACHINE_CONFIGS_ID=`echo $MACHINE_JSON | jsonValue configs_id 1`
CONFIG_NAME=`echo $MACHINE_JSON | jsonValue name 2`
......@@ -128,7 +125,7 @@ getConfigFile() {
echo "Error downloading config file (machine_id empty, maybe it is not in LabManager's DB)"
return 1
fi
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /local/esame-machine.conf --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/configfile`
HTTP_STATUS=`retry /usr/bin/curl -s -k -w "%{http_code}" -o /local/esame-machine.conf --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/configfile`
if [[ $HTTP_STATUS -ne 200 ]]
then
echo "Error downloading config file (http_status=$HTTP_STATUS)"
......@@ -142,7 +139,7 @@ getConfigFile() {
getIpConfigFile() {
echo "Downloading machine iptables config file..."
# get ipconfig file
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /local/iptables --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/ipconfigfile`
HTTP_STATUS=`retry /usr/bin/curl -s -k -w "%{http_code}" -o /local/iptables --max-time 10 --header "Authorization: Bearer ${TOKEN}" -X GET ${API_BASE_URL}/machines/${MACHINE_ID}/ipconfigfile`
if [[ $HTTP_STATUS -ne 200 ]]
then
echo "Error downloading iptables config file (http_status=$HTTP_STATUS)"
......@@ -155,7 +152,7 @@ getIpConfigFile() {
updateCurrentConfigId() {
# Update this machine's current config id
HTTP_STATUS=`/usr/bin/curl --retry-connrefused --retry ${MAX_RETRY} -s -k -w "%{http_code}" -o /dev/null --max-time 10 -H "Content-Type: application/json" -H "Authorization: Bearer ${TOKEN}" \
HTTP_STATUS=`/usr/bin/curl -s -k -w "%{http_code}" -o /dev/null --max-time 10 -H "Content-Type: application/json" -H "Authorization: Bearer ${TOKEN}" \
-X PUT -d "{\"current_configs_id\":\"$MACHINE_CONFIGS_ID\"}" ${API_BASE_URL}/machines/${MACHINE_ID}/currentconfig`
if [[ $HTTP_STATUS -ne 200 ]]
......